Micro-CT evaluation of the removal of root fillings using rotary and reciprocating systems supplemented by XP-Endo Finisher, the Self-Adjusting File, or Er,Cr:YSGG laser.

Objectives: This study aimed to compare the effectiveness of a single-file reciprocating system (WaveOne Gold, WOG) and a multi-file rotary system (ProTaper Universal Retreatment, PTUR) in removing canal filling from severely curved canals and to evaluate the possible adjunctive effects of XP-Endo Finisher (XPF), the Self-Adjusting File (SAF), and an erbium, chromium: yttrium, scandium, gallium garnet (Er,Cr:YSGG) laser using micro-computed tomography (µCT). Materials and Methods: Sixty-six curved mandibular molars were divided into 2 groups based on the retreatment technique and then into 3 based on the supplementary method. The residual filling volumes and root canals were evaluated with µCT before and after retreatment, and after the supplementary steps. The data were statistically analyzed with the t-test, Mann-Whitney U test, analysis of covariance, and factorial analysis of variance (p < 0.05). Results: PTUR and WOG showed no significant difference in removing filling materials (p > 0.05). The supplementary techniques were significantly more effective than reciprocating or rotary systems only (p < 0.01). The supplementary steps showed no significant differences in canal filling removal effectiveness (p > 0.05), but XPF showed less dentin reduction than the SAF and Er,Cr:YSGG laser (p < 0.01). Conclusions: The supplementary methods significantly decreased the volume of residual filling materials. XPF caused minimal changes in root canal volume and might be preferred for retreatment in curved root canals. Supplementary approaches after retreatment procedures may improve root canal cleanliness.

Investigation of taurine and aqueous garlic extract diet supplementation effect on the healing of rat osteoporotic fractures.

BACKGROUND: We have evaluated the effects of taurine and aqueous garlic extract (AGE) as a dietary supplement on osteoporotic fracture (OPF) healing in the ovariectomized rat femur fracture model. METHODS: In this experimental animal study,twenty-four osteoporosis-remodeled female Wistar albino rats were randomly divided into 3 groups (n: 8) according to their supplemented diet; control, taurine, and AGE groups. Unilateral femur middiaphysis mini-open osteotomy was stabilized with Kirschner wires. Six weeks after osteotomy, the rats were sacrificed before the femurs were harvested and OPF healing was evaluated with biochemical, histologic, microcomputed-tomography, and scintigraphic methods. RESULTS: As an indicator of the antiosteoporotic effect, the calcium levels of the taurine group were significantly lower than the AGE and control groups in biochemical analyzes (p < 0.01). In histological studies, the new bone diameter and new bone volume values of the taurine group were significantly higher than the control group (p = 0.002 and p = 0.032, respectively), while higher trabecular-compact callus was observed in the taurine and AGE groups, respectively, compared to the control group. In morphological analyses, taurine and AGE groups had significantly higher bone volume/tissue volume, trabecular number, bone surface density, and lower trabecular separation than the control group (p < 0.05). The scintigraphic imaging showed a significant increase in osteoblastic activity of the taurine group compared to the control group (p = 0.005). DISCUSSION: Taurine and AGE have positive anabolic effects, respectively, on the healing of OPFs, demonstrated by biochemical, histological, morphological, and scintigraphic methods.

The combined use of carbon nanotubes with synthetic ceramics enhances posterolateral fusion: an experimental study in a rat spinal fusion model.

PURPOSE: The aim of the present study was to evaluate the effectiveness of carbon nanotubes (CNTs)/ HA-tricalcium phosphate (TCP) composite in a posterolateral spinal fusion model. METHODS: At first, CNTs and CNTs/HA-TCP composites were prepared. Twenty adult male Sprague Dawley rats were randomized into four groups with five rats in each group. Decortication was carried out in standard manner in all animals. Group 1 (only decortication), group 2 (CNTs), group 3 (HA-TCP) and group 4 (CNTs/HA-TCP) were formed. Eight weeks later, all animals were killed and obtained fusion segments were evaluated by manual palpation, histomorphometry and micro-computed tomography (mCT). RESULTS: In all evaluations, highest fusion values were obtained in Group 4. In mCT investigations, bone volume/ tissue volume (BV/TV) ratio was found to be significantly higher in composite group (group 4) only compared to ceramic group (group 3) (p < 0.001). Although in Group 2, in which only CNTs were used, the ratio was found to be statistically significantly higher than group 1(p < 0.001), the difference was not considered as significant in terms of fusion and in addition in group 2, CNTs were completely surrounded by fibrous tissue, i.e., no bone formation was observed. CONCLUSIONS: The CNTs/HA-TCP composite is a promising synthetic bone graft substitute for spinal fusion. Although CNTs are inadequate in producing spinal fusion when they are used alone, due to their high biocompatibility due to their high biocompatibility, and multiple effect on bone regeneration, they seem to increase fusion rates significantly when they are used in combination with ceramic-based synthetic grafts.

The illustrations and terminology of Hamse-i Sânizâde written by Sânizâde Ataullah Efendi: the stomach / Las ilustraciones y terminología de Hamse-i Sânizâde escrito por Sânizâde Ataullah Efendi: el estómago

SUMMARY: The book "Mirâtü'l-Ebdân fi Tesrîh-i Âzâü'l-Insân" written by Sânîzâde Mehmet Ataullah Efendi was the first illustrated anatomy book published in the Ottoman Empire. The aim of this study was to determine the similarities and differences between the terms and definitions of stomach anatomy used by Sânîzâde at that time and those used today. The stomach section of the "Mirâtü'l-Ebdân fi Tesrîh-i Âzâü'l-Insân" was examined and related plates were translated into the Turkish language. Anatomical terms and definitions of stomach anatomy in this book were compared to the stomach terminology used in "Terminologia Anatomica" which is the reference book for terminology today. The stomach section was explained under the title "El-Babu-Sâlis fi Tesrihi'l-Mi'de" (Illustrated Stomach Anatomy) in this book. Parts, margins, arteries, veins, nerves and layers of the stomach were explained with the terms and definitions of that period. Terminologia Anatomica has 33 anatomical terms related to the stomach, while 15 terms were identified in the book "Mirâtü'l-Ebdân fi Tesrîh-i Âzâü'l-Insân". Although more terms related to the stomach anatomy are used today, the fundamental information on stomach anatomy in Sânîzâde's book was compatible with much of the information used in modern anatomy books today.

El libro "Mirâtü'l-Ebdân fi Tesrîh-i Âzâü'l- Insân" escrito por Sânîzâde Mehmet Ataullah Efendi fue el primer libro de anatomía ilustrado y publicado en el Imperio Otomano. El objetivo de este estudio fue determinar las similitudes y diferen- cias entre los términos y definiciones de la anatomía del estómago utilizados por Sânîzâde en ese momento y los que se utilizan en la actualidad. Se examinó la sección del estómago del "Mirâtü'l-Ebdân fi Tesrîh-i Âzâü'l-Insân" y las placas relacionadas se tradujeron al idioma turco. Los términos anatómicos y las definiciones de la anatomía del estómago en este libro se compararon con la terminología del estómago utilizada en Terminologia Anatomica, el libro de referencia para la terminología utilizado actualmente. La sección del estómago se explicó bajo el título "El-Babu-Sâlis fi Tesrihi'l-Mi'de" (Anatomía del estómago ilustrada) en este libro. Fueron definidas las partes, márgenes, arterias, venas, nervios y capas del estómago con los términos y definiciones de esa época. Terminologia Anatomica tiene 33 términos anatómicos relacionados con el estómago, mientras que 15 términos fueron identificados en el libro "Mirâtü'l-Ebdân fi Tesrîh-i Âzâü'l-Insân". Aunque hoy en día se utilizan más términos relacionados con la anatomía del estómago, la información fundamental sobre la anatomía del estómago en el libro de Sânîzâde era compatible con gran parte de la información utilizada en los libros de anatomía modernos en la actualidad.

Evaluation of the Efficiency of the Graft Material Combined with Ozonized Blood in Maxillary Sinus Lifting Applications in Rabbits.

Objectives: The aim of this study is to investigate the effect of the graft material combined with ozonized blood on bone healing in rabbit in maxillary sinus lifting applications histomorphometrically, immunohistochemically and microtomographically. Materials and Methods: Twenty-eight New Zealand rabbits were randomly divided into 2 groups as experimental (n = 14) and control (n = 14). In experimental group, 5 ml (milliliter) blood obtained from the ear vein of each rabbit was ozonized by 80 µl (µl)/ml concentration ozone-oxygen mixture. Graft material was combined with this ozonized blood. In control group, the graft was combined with saline solution at 0.9% concentration. A 5 mm (millimeter) in diameter window was created on right maxillary sinus window in each rabbit under general anesthesia by local anesthesia support. Sinus membrane was elevated and the space was augmented by 1 cc (cubic centimeter) graft material. One rabbit from the control group which was planned to sacrifice at the end of 8 weeks could not participate in the evaluation because of the extensive inflammation at the operation site. Newly formed bone area and bone density were measured using by image analysis program. Bone morphogenetic protein-2 (BMP-2), vascular endothelial growth factor (VEGF) and collagen-1 (COL-1) analyses were carried out immunohistochemically. The amount of the newly generated bone and the amount of the total augmented space were calculated volumetrically by microtomography. Results: According to histomorphometrical analysis, although newly formed bone area has increased in both experimental and control group with time, statistically significant results were obtained when only O-8 (ozone-treated experimental group planned to be sacrificed after 8 weeks) and O-4 (ozone-treated experimental group planned to be sacrificed after 4 weeks) groups were compared (p = 0,037). The increase in new bone density was seen in both experimental and control groups with time and the results were statistically significant when O-8 group compared to O-4 and C-4 group (ozone-free control group planned to be sacrificed after 4 weeks) (p = 0,07 and p = 0,04, respectively) and C-8 (ozone-free control group planned to be sacrificed after 8 weeks) group compared to C-4 group (p = 0,023). According to immunohistochemical analysis, the intensity and the severity of field staining with anti-BMP-2 have increased in experimental group whereas it has decreased in control group but despite that there was no statistically significance among all groups compared to each other. The number of new vessels stained with anti-VEGF has increased in both experimental and control group with time and multiple comparison results were statistically significant when O-8 group compared with O-4 and C-4 (p = 0,000, p = 0,000, respectively), O-4 group compared with C-8 (p = 0,000) and C-8 group compared with C-4 (p = 0,000). Although the intensity and the severity of field staining with anti-COL-1 have increased in both experimental and control group with time, there was no statistically significance among all groups compared to each other. According to microtomographical analysis, the percentage of the volume of the newly generated bone in the total augmented space volume has decreased with time in both experimental and control groups. Conclusions: Considering the results of this study, the graft material combined with the ozonized blood increased the density of the newly generated bone and the number of new vessels in maxillary sinus lifting applications in rabbits. Clinical Relevance: We suggest further studies should be done combining the graft with ozone by different methods, dosages and exposure times.

Analysis of the nano and microstructures of the cervical cementum and saliva in periodontitis: A pilot study.

OBJECTIVES: During the progression of periodontitis, the structures of the cementum and saliva are altered due to pathological changes in the environment. This study aimed to analyze the nanostructures of the cervical cementum and saliva in patients with periodontitis. METHODS: Patients with periodontitis (n = 10) and periodontally healthy controls (n = 8) were included. Single-rooted teeth with indications for extraction were obtained from individuals. The cervical-thirds of the roots were sectioned transversely to obtain 1 mm thick sections. Unstimulated whole saliva samples were collected from each individual. The nanostructures of the cementum and saliva were analyzed using small and wide-angle X-ray scattering methods. RESULTS: The mean radius and distance values of the cementum nanoparticles in the periodontitis and control groups were 368 Å and 1152 Å, and 377 Å and 1186 Å, respectively. The mean radius and distance values of the saliva nanoparticles in the periodontitis and control groups were 425 Å and 1359 Å, and 468 Å and 1452 Å, respectively. More wide-angle X-ray scattering profile peaks were observed in the cementum of the controls. Similarities were observed between the 3D profiles of the cementum and the saliva nanoparticles. CONCLUSIONS: According to the results of the present study, (i) the cementum and saliva nanoparticles were of similar size in periodontitis and healthy controls, (ii) the cementum was more crystalline according to the (002) crystallographic plane in controls, and (iii) the similarities in the 3D-profile of the cementum and saliva nanoparticles suggest some interactions between them in the sulcus/periodontal pocket at the nanolevel.

Evaluation of the effects of locally applied rosuvastatin on bone formation in a three-dimensional reconstruction rabbit xenograft model

Background/aim: Guided bone regeneration (GBR) is commonly performed to repair bone defects, and rigid occlusive titanium barriers play a vital role in bone formation in regions with no prior bone tissue. The statin, rosuvastatin (RSV), strongly affects bone apposition when applied locally. Here, we aimed to evaluate the anabolic effects of locally applied RSV with a xenograft placed on rabbit calvaria. Materials and methods: Two rigid occlusive titanium caps were used in 16 rabbits after decorticating the calvarial bone. In the control group, the area under the cap was filled with a xenograft, while in the RSV group, a xenograft in combination with RSV (1 mg) was used. In both groups, at 6 and 12 weeks, new bone, residual graft, soft tissue areas, and histological and radiological bone volume were evaluated. Results: At 12 weeks, histologically, the RSV group exhibited superior new bone proportion values, and radiologically, new bone and total bone volume in the RSV group were significantly higher than in the control group (p < 0.05); there were no significant differences at 6 weeks (p > 0.05). Conclusion: According to our results, RSV applied locally under a titanium barrier on an area to be repaired with bone grafts increases new bone and total bone volume.

Filling quality of several obturation techniques in the presence of apically separated instruments: A Micro-CT study.

Separated root canal instruments may affect the quality of root canal obturation and hence the survival of endodontically treated teeth. Obturation techniques may influence filling-quality. The aim was to evaluate the obturation quality of teeth filled with different obturation techniques in the presence of apically separated instruments using micro-computed tomography (µ-CT). Notched ProTaper F2 rotary-files were separated in the apical third of 36-human mandibular incisors with single root/canal and mature apex. Samples were filled by an endodontist according to one of the following obturation techniques (n = 12): cold lateral-compaction (CLC), single-cone (SC) and thermoplastic injection (TI). Samples were scanned by the Skyscan 1,274® µ-CT device after 1-week at 37°C in 100% humidity. Images of the sections were evaluated with CTan software in terms of total-volume and volume percentage of the filling materials and voids between coronal end of the separated instrument and gutta-percha/sealer filled void-free sections. Data was analyzed using Kruskal-Wallis and Mann Whitney-U tests with a significance level of 5%. Kruskal-Wallis revealed differences among groups (p < 0.05).Pairwise comparisons revealed that less volume of voids were measured in SC (0.02 ± 0.03 mm3 ) compared to CLC (0.15 ± 0.16 mm3 ) and TI (0.18 ± 0.24 mm3 ) (p < 0.05); while TI was statistically similar with CLC (p > 0.05). Percentages of volumes of voids and filling materials were as follows for SC, CLC and TI, respectively: 8.88 ± 18.52% and 24.45 ± 38.40%, 46.92 ± 33.53% and 53.07 ± 33.53%, 40.54 ± 33.85% and 42.79 ± 34.45%. The obturation technique may have a significant impact on the volume of voids in the presence of a separated file. No obturation technique produced a void-free root canal filling.

Intramedullary implants coated with cubic boron nitride enhance bone fracture healing in a rat model.

BACKGROUND: Boron nitride is a biocompatible and an osteo-inductive material for orthopedic applications. The aim of this study was to evaluate the effects of two different allotrope boron nitride coated implants, cubic boron nitride and hexagonal boron nitride, on fracture healing. METHODS: In this experimental study, a total of 24 rats were divided into three groups. Group A was the control group with Kirschner wire without coating, while the wires were coated dominantly by cubic boron nitride in Group B and hexagonal boron nitride in Group C. Then a mid-third femoral fracture was created. The fracture healing was examined in terms of new bone formation with micro-CT analysis and histopathological examination, quantitative measurement of bone turnover metabolites and scintigraphic examination of osteoblastic activity on 28th day post fracture. RESULTS: Micro-CT measurement results revealed a statistically significant increase in bone volume/tissue volume ratio and bone surface values in group B compared to group A. Cortex diameter and osteoblast counts were statistically higher in group B compared to group A. Inflammatory response was increased in group C compared to groups A and B. Biochemical test results showed significantly increased alkaline phosphatase levels and decreased osteocalcin levels in group B compared to group A. The increase in serum phosphorus and decrease in serum calcium levels was statistically significant in group C compared to Group A. CONCLUSION: Both types of boron nitride coating had superior fracture healing features compared to control group. Therefore, c-BN coating can accelerate the fracture healing and could lead to shorten of union time.

Evaluation of the Amount of Root Canal Dentin Removed and Apical Transportation Occurrence after Instrumentation with ProTaper Next, OneShape, and EdgeFile Rotary Systems.

INTRODUCTION: The aim of this study was to evaluate the amount of root canal dentin removed and apical transportation occurrence after instrumentation of mesiobuccal canals of maxillary molars with ProTaper Next (PTN [Dentsply Maillefer, Ballaigues, Switzerland]), OneShape (OS [MicroMega, Besançon, France]), and EdgeFile (EF [Edge Endo, Albuquerque, NM]) rotary systems. METHODS: Twenty-seven mesiobuccal canals of maxillary molars were used. Canals were randomly divided into 3 groups for canal preparation: PTN, EF X3, or OS (n = 9 for each group). Micro-computed tomographic imaging was used to measure apical transportation (mm) and the volume of dentin removed (mm3). The amount of dentin removed was measured for the coronal portion and for the whole canal length. Superposition of pre- and postoperative cross-sectional apical slices were used to measure apical transportation at 1 mm from the apex; the differences were evaluated using the Kruskal-Wallis test and Wilcoxon analysis. The Spearman correlation coefficient was used to display the relationship between variables for each group. The significance level was set at P < .05. RESULTS: The percentages of the amount of dentin removed on the coronal portion and the amount removed for the whole canal length were statistically similar between groups (P > .05). The average amount of apical transportation for the PTN, OS, and EF X3 were 0.197, 0.263, and 0.218 mm, respectively. Statistically, there were no significant differences between the 3 rotary instruments for apical transportation. CONCLUSIONS: The amount of dentin removed for the coronal third portion and the whole canal length was similar for the PTN, OS, and EF X3 rotary instruments. Although there were differences in the sizes of apical enlargement, no apical transportation was observed in any of the instrumentation systems.

Locally administrated single-dose teriparatide affects critical-size rabbit calvarial defects: A histological, histomorphometric and micro-CT study.

OBJECTIVE: The aim of this study was to evaluate the effect of teriparatide (PTH 1-34, rhPTH) on a rabbit defect model with local xenogen grafts histomorphometrically and radiologically. METHODS: For this purpose, two 10 mm diameter critical-size defects were created in the calvaria of 16 rabbits. In the control group, the defect area was filled with a xenogen graft, while in the teriparatide group (PTH 1-34), a xenogen graft combination with 20 mcg teriparatide was used. For both 4 - week and 8 - week study groups, new bone, residual graft, and soft tissue areas were evaluated as well as bone volume histomorphometrically and radiologically. RESULTS: Histomorphometrically, there was a significant difference in new bone area values at the 8th week (p < 0.05), but there was no significant difference between the 4 - week values (p > 0.05). There was no statistically significant difference between the groups at both 4 and 8 weeks (p > 0.05). In the radiologically measured total bone volume values, PTH1-34 group values were found to be significantly higher for both 4 - and 8 - weeks values compared to the control groups (p < 0.05). CONCLUSION: In this study, rhPTH, which is used locally in defect areas to be repaired with bone grafts, increases both new bone volume and total bone volume.

Microcomputed Assessment of Transportation, Centering Ratio, Canal Area, and Volume Increase after Single-file Rotary and Reciprocating Glide Path Instrumentation in Curved Root Canals: A Laboratory Study.

INTRODUCTION: The aim of this study was to compare the transportation and centering abilities of the ProGlider (PG; Dentsply-Sirona, Ballaigues, Switzerland), WaveOne Gold Glider (WOGG; Dentsply-Sirona), and R-Pilot (RP; VDW, Munich, Germany) file systems and the changes in the structure model index (SMI), surface area, and root canal volume (after creating the glide path in the mandibular first molar teeth's mesial canals with moderate curvature) using the micro-computed tomographic (micro-CT) method. METHODS: In the present study, 24 mandibular first molar teeth with 2 separate mesial canals and moderate (10°-20°) curvature were used. After scanning with micro-CT imaging before the procedure, the teeth were divided into 3 groups, PG, WOGG, and RP (n = 10/each group), followed by the glide path procedure. After the root canal preparation, changes in the root canals regarding the volume, surface area, SMI, transportation made by the files, and the change of their centering ability in the apical, middle, and coronal third were analyzed by micro-CT imaging. The data were statistically evaluated using 1-way analysis of variance and the Kruskal-Wallis test with a significance level set at 5% (P < .05). RESULTS: The WOGG and RP file systems showed better centering abilities at all thirds compared with the PG file system (P < .05). No significant difference was found in the apical third between the groups in terms of canal transportation degree (P > .05). However, in the WOGG and RP groups, less transportation was observed in the middle and coronal thirds compared with the PG group (P < .05). When the SMI changed, after the root canal preparation was compared, no significant differences were found between the groups (P > .05). Nevertheless, the changes in volume and surface area of the root canal in the WOGG and RP groups were significantly lower than in the PG group (P < .05). CONCLUSIONS: The WOGG and RP file systems caused similar levels of change in the root canal systems based on all parameters. Moreover, it was determined that the PG file system caused a significantly higher volume and surface area increase than the WOGG and RP file systems.

Stem cells combined 3D electrospun nanofibrous and macrochannelled matrices: a preliminary approach in repair of rat cranial bones.

Repair of cranial bone defects is an important problem in the clinical area. The use of scaffolds combined with stem cells has become a focus in the reconstruction of critical-sized bone defects. Electrospinning became a very attracting method in the preparation of tissue engineering scaffolds in the last decade, due to the unique nanofibrous structure of the electrospun matrices. However, they have a limitation for three dimensional (3D) applications, due to their two-dimensional structure and pore size which is smaller than a cellular diameter which cannot allow cell migration within the structure. In this study, electrospun poly(ε-caprolactone) (PCL) membranes were spirally wounded to prepare 3D matrices composed of nanofibers and macrochannels. Mesenchymal stromal/stem cells were injected inside the scaffolds after the constructs were implanted in the cranial bone defects in rats. New bone formation, vascularisation and intramembranous ossification of the critical size calvarial defect were accelerated by using mesenchymal stem cells combined 3D spiral-wounded electrospun matrices.

Epidermal growth factor enhances spinal fusion: Posterolateral lumbar fusion model on rats.

OBJECTIVE: The aim of this study was to investigate the effects of human recombinant epidermal growth factor (EGF) on posterolateral lumbar fusion in a rat model. METHODS: 36 male Sprague Dawley rats underwent posterolateral fusion at L4-5 level. They were randomly assigned to 3 groups: 1- Sham control group where no local augmentation was made, 2- Local Hydoxyapatite ß-tricalcium phosphate (HA/ß-TCP) augmentation group and 3- Local HA/ß-TCP + EGF augmentation group. Rats were euthanized at 8 weeks post-surgery. 6 rats from each group were selected for manual palpation examination, micro-computed tomography analysis and histologic analysis; and the rest was used for biomechanical analysis. RESULTS: Based on manual palpation, there was no fusion in the sham control group. Fusion rate was 33.3% in the HA/ß-TCP group and 66.7% in the HA/ß-TCP + EGF group (p = 0.085). Micro-CT results revealed that new bone formation was higher in the HA/ß-TCP + EGF group (BV/TV: 40% vs. 65%) (p = 0.004). Histologically newly formed bone tissue was more pronounced in the EGF group and compacted and bridging bone spicules were observed. The median maximum bending moment values were 0.51 Nmm (0.42-0.59), 0.73 Nmm (0.49-0.88) and 0.91 Nmm (0.66-1.03) in the sham control, HA/ß-TCP and HA/ß-TCP + EGF groups, respectively (p = 0.013). The median stiffness values were 1.69 N/mm (1.12-2.18), 1.68 N/mm (1.13-2.74) and 3.10 N/mm (1.66-4.40) as in the previous order (p = 0.087). CONCLUSION: This study demonstrates that EGF enhances posterolateral lumbar fusion in the rat model. EGF in combination with ceramic grafts increased the fusion rates. Our findings may provide insights to further studies, investigating EGF's clinical usage as an alternative fusion enhancer.

Evaluation of XP-endo Shaper, Reciproc Blue, and ProTaper Universal NiTi Systems on Dentinal Microcrack Formation Using Micro-Computed Tomography.

INTRODUCTION: The purpose of the present study was to evaluate the frequency of dentinal microcracks observed after root canal preparation with XP-endo Shaper (XP), Reciproc Blue (RB), and ProTaper Universal (PTU) instruments using micro-computed tomographic (µCT) analysis. METHODS: Thirty extracted mandibular first and second molars with mesial roots having 2 separate canals with an angle between 10°and 20° were randomly assigned to 3 experimental groups (n = 10) according to the different nickel-titanium systems used for root canal preparation: XP, RB, and PTU. The specimens were scanned using µCT imaging before and after root canal preparation. Then, preoperative and postoperative cross-sectional images of the teeth were evaluated to identify the presence of dentinal defects. For each group, the number of microcracks was determined as a percentage rate. The McNemar test was used to determine significant differences before and after instrumentation. The level of significance was set at P ≤ .05. RESULTS: No new dentinal microcracks were observed in the XP and RB groups. The PTU system significantly increased the percentage rate of microcracks compared with preoperative specimens (P < .05). CONCLUSIONS: Root canal preparations with XP and RB systems might not induce the formation of new dentinal microcracks on the mesial roots of mandibular molars. Further assessments are suggested for the examination of the morphology of microcracks after the use of these instruments.

Investigation of the effects of semaphorin 3A on new bone formation in a rat calvarial defect model.

PURPOSE: This study investigates the effects of semaphorin 3A on new bone formation in an experimental rat model. MATERIALS AND METHODS: Cortical bone defects, 5 mm, were created in the calvaria of 40 Wistar rats, which were then separated into three groups: empty defect (control) group, collagen group, collagen + semaphorin 3A group. The bone blocks were harvested after 4 and 8 weeks. New bone formation was assessed by micro-computed tomography (micro-CT), histology, histomorphometry, transmission electron microscope (TEM) and immunohistochemistry. RESULTS: Increased bone formation was observed in collagen + semaphorin 3A groups both histologically and with micro-CT. In the histomorphometic analysis, the control group had significantly less bone formation compared to both the collagen and collagen + semaphorin 3A group at 4 weeks (p = 0.0001) and 8 weeks (p = 0.0001). The collagen group had significantly less bone formation compared to collagen + semaphorin 3A group both at 4 weeks (p = 0.002) and 8 weeks (p = 0.005). Immunohistochemical analysis revealed that semaphorin 3A inhibited receptor activator of nuclear factor-kB ligand (RANKL) expression and increased the expressions of osteoblastic bone markers at 4 weeks. In TEM analysis, the collagen + semaphorin 3A group had an increased proliferation and bone formation rate at 4 weeks, whereas bone quantity and maturation were enhanced at 8 weeks. CONCLUSION: Locally applied semaphorin 3A increases callus formation at 4 weeks and bone formation at 8 weeks. Semaphorin 3A prevents bone resorption by inhibiting osteoclasts and increases bone formation by inducing osteoblasts.

Obturation quality of calcium silicate-based cements placed with different techniques in teeth with perforating internal root resorption: a micro-computed tomographic study.

OBJECTIVES: To evaluate and compare the obturation quality of mineral trioxide aggregate (MTA) and Biodentine placed with hand condensation or indirect ultrasonic activation technique in teeth models simulating perforating internal root resorption (IRR) using micro-computed tomographic (micro-CT) imaging. MATERIALS AND METHODS: Standardized models with perforating IRR cavities were created using 40 extracted single-rooted human teeth and randomly divided into four groups (n = 10). The specimens were obturated with either MTA or Biodentine and the placement technique applied was either hand condensation or indirect ultrasonic activation. Micro-CT scans were performed for the volumetric analysis of voids and filling materials in the resorption cavities and apical portion of the specimens. Data were analyzed using one-way analysis of variance and paired t test. RESULTS: No significant difference was observed between the groups in terms of the percentage volume of filling materials (p > 0.05). The apical portion of the specimens significantly presented less percentage volume of filling materials than the resorption cavities in each group (p < 0.05). CONCLUSIONS: No placement technique produced void-free fillings in teeth with perforating IRR. There was no significant difference between the obturation quality of Biodentine and MTA. The obturation quality in the apical portion of the root canals was inferior than that in the resorption cavities. CLINICAL RELEVANCE: The obturation of the apical region of teeth with perforating IRR is challenging irrespective of the material type and placement technique.

Does Periosteal Graft Combined With Platelet-Rich Plasma Enhance the Healing of Bone Defect?

INTRODUCTION: This study investigated the effect of periosteal graft + platelet-rich plasma (PRP) combination on facial bone defect healing. METHODS: Five-millimeter critical sized defects in zygomatic arches of 12 adult New Zealand rabbits were created. Rabbits were randomly divided into 3 groups: First group (control group): bone defects of left zygomatic arches of 6 rabbits were wrapped with a silicone tube. Second group (periosteal graft group): bone defects of left zygomatic arches of 6 rabbits were wrapped with periosteal graft. Third group (experimental group): bone defects of right zygomatic arches of 12 rabbits were wrapped with periosteal graft-PRP combination. New bone formation was evaluated at 8th and 16th weeks. One rabbit was sacrificed at 8th week. Remaining 11 rabbits were imaged with 3-dimensional computed tomography (CT) at 16th week; then, zygomatic arches were removed for micro-CT and histologic examinations. RESULTS: Three-dimensional CT analysis at 16th week revealed no significant difference between groups regarding new bone formation (P = 0.232). Micro-CT analysis of new regenerated bone at 16th week displayed significant differences between groups 1 and 3 regarding mean bone volume (BV, mm) (P = 0.028) and mean bone mineral density (BMD, mm) (P = 0.001). There was no difference between groups 2 and 3 or between groups 1 and 2, regarding BV or BMD. Histological Bone Regeneration Scorings at 16th week displayed significant difference between groups (P = 0.015). Negative correlation between 3-dimensional CT and histologic results (r = 0.120); positive correlations between BV/BMD values in micro-CT and histologic results (r = 0.524 and r = 0.456) were found. CONCLUSIONS: By enhancing bone formation capacity of periosteal grafts, periosteal graft-PRP combination provided bone formation having more volume and density comparing with silicone tube application.

A Novel Method of Neo-osseous Flap Prefabrication: Induction of Free Calvarial Periosteum with Bioactive Glass.

BACKGROUND: Reconstruction of craniofacial bone defects is a primary focus of craniofacial surgery. Although autogenous bone grafts remain as the gold standard, alloplastic materials have also gained widespread popularity due to their off-the-shelf availability, ease of use, and durability. In addition to replacing the missing bone, some of these alloplastic materials have also been found to induce new bone formation. OBJECTIVES: In this study, the phenomenon of neo-osseous induction with bioactive glass was investigated for different implant-soft tissue configurations. MATERIALS AND METHODS: Thirty-two male, Wistar albino rats were divided into four equally numbered study groups. In group 1 (FP), adipofascial groin flaps were prefabricated with free periosteal grafts. In group 2 (FPB), adipofascial groin flaps were prefabricated with free periosteal grafts and bioactive glass. In group 3 (FB), adipofascial groin flaps were prefabricated with bioactive glass. In group 4 (control), adipofascial groin flaps were not prefabricated. Morphometric analyses of the prefabricated structures were performed using micro-CT. The histologic properties of the ectopic ossification were assessed by using a modified scoring system. RESULTS: Group 1 (FP) showed the greatest rate of mature lamellar bone formation. Group 2 (FBP) showed the greatest amount of bone density and volume. However, the addition of bioactive glass in group 2 (FBP) decreased the rate of mature lamellar bone formation when compared with group 1 (FP). Ectopic ossification was not observed in the control group. CONCLUSION: Bioactive glass can be successfully used in the prefabrication of vascularized compound structures for the reconstruction of complex bone defects. However, interference with the periosteal induction of mature lamellar bone formation should be taken into consideration, especially in pediatric bone defects, which primarily rely on spontaneous osteogenesis through periosteal induction.